请输入
进入官网
菜单
首页Onstep Goto KitEnglishDeveloperMotor Ports Definition

Motor Ports Definition

下载

Motor Ports Definition

When you need to modify the controller to drive other stepper motors, please refer to the following interface definition instructions for wiring.

(incomplete)

分享文章
上一个
V5 Version Flash Firmware
下一个
FAQ
最近修改: 2025-01-23
  • Onstep Goto Kit
    • 简体中文
      • 使用说明
        • V5 Pro设备简介
        • 供电电源
        • 安装套件
        • 安卓手机控制
        • 苹果手机控制
        • PC端连接Stellarium
        • PC端连接PHD2
        • PC端连接NINA
        • 安装DIY电调焦/旋转器
        • 通过NINA控制快门线
        • 切换赤道仪/经纬仪模式
        • 恢复初始固件
        • 更换纽扣电池
      • SHC控制手柄
        • 连接设备
        • 按键和功能说明
        • 设置限位
        • 设置时间地点
        • 三星校准
        • 选择目标GOTO
        • 调整跟踪速度
      • 二次开发
        • 搭建Arduino编译环境
        • V4版本 烧录固件到控制盒
        • V5版本 设置下载模式
        • 电机接口定义
      • 常见问题
      • 补丁通知
    • English
      • User Manul
        • V5 Pro Introduction
        • Power Supply
        • Connect to NINA
        • Restore Firmware
        • Switch GEM/ALT-AZM mode
        • Replace Button Battery
      • SHC
        • Connect
        • Button and Function
        • Set Limit
        • Set Time and Location
        • 3-Star Alignment
        • Start Goto
        • Adjust Tracking Speed
      • Developer
        • Set up Arduino
        • V4 Version Flash Firmware
        • V5 Version Flash Firmware
        • Motor Ports Definition
      • FAQ
      • Patch notification
  • T.C.C. Dome 远程台平顶控制器
    • 简介
    • 控制盒接口说明
    • 硬件设备安装
    • 软件驱动安装
    • 开始使用