Control Box Introduction
This article introduces the functions and basic parameters of various interface components and switches on the V5 Pro control box.
| Power Input | 12V-24V 5.5-2.1 Port |
| Power Output | Output Voltage = Input Voltage，ALWAYS ON，Cannot be used for input，5.5-2.1 Port （Single port maximum support 2A） |
| Tracking Power | About 8W |
| GOTO Power | About 12W |
| USB Speed | USB2.0 |
| USB Power | 5V 1A ALWAYS ON，Not recommended for high-power devices |
| Pinmap | Provide Pinmap based on MAXESP3 |
| Chipset | ESP32 and ESP8266 |
| Driver Chip | TMC2225 Dual V2 |
| Download Mode | One click automatic download |
| Control System | OnstepX （Support custom upgrade） |
| Control Mode | WIFI / Bluetooth / SHC / ST4 |
| Mode | GEM / ALT-AZM Switch |
| Step Motor | 1.8° / 40mm Nema17 step Motor |
| Secondary Reduction Ratio | RA = DEC = 3 : 1 |
