Switch GEM/ALT-AZM mode
Onstep supports switching between GEM and ALT-AZM mode. Please follow the following tutorial to switch.
①Connect To Onstep hotspot
After the device is powered on, connect to Onstep's hotspot using your phone or computer.
The WiFi password for Onstep is [ password ].
②Visit SWS Console webpage
Open the browser, enter 192.168.0.1 . Click on Enable Advanced Configuration at the bottom of the Controller page.
③Switch GEM/ALT-AZM mode
After Enable Advanced Configuration, expand the settings menu in the state and switch between GEM/ALT-AZM by entering the corresponding number in the input box. As shown in step 2 of the figure, enter 3 and click upload to switch to ALT-AZM mode. Enter 1 and upload to switch to GEM mode.
After clicking upload, the device needs to be powered off and restarted for the settings to take effect.
④Switch through Onstep app
After completing the second step of Enable Advanced Configuration, Mode switching can be done through the mobile app.
Firstly, connect to Onstep's hotspot through your phone and connect the device in the Onstep app. Go to the initialization/parking menu on the homepage, and then switch between GEM/ALT-AZM modes at the bottom of the menu. After switching, the device also needs to be powered off and restarted.